Logo - The caravan shop - For all your caravan accessories

Location: Shortcut to Homepage /Security Locks & Wheel Clamps/Milenco Wraith Lock/MILENCO Wraith Wheel Lock

MILENCO Wraith Wheel Lock

MILENCO Wraith Wheel Lock

Product Information

  • The New MILENCO Wraith Caravan Wheel Lock has been designed and engineered to far exceed the Sold Secure Gold Standard.

    The Sold Secure Gold Standard is two and half times tougher the Thatcham Category 3

    Designed to be simple to fit, whilst achieving uncompromising security for your caravan.

    Fits by replacing one of the caravan wheel bolts with the Wraith's specially engineered Low Mass Security Wheel Bolt Receiver. The Wraith has a foam covered high grade steel bar, that locates through the wheel, which stops wheel rotation.

    Simply position the bar through the wheel and lock the Wraith to the Security Bolt Receiver.

    Constructed from the highest quality steel with a high grade, high visibility, non-corrosive plastic cover.

  • Fits Alloy Wheels

  • Complete with 3 keys and carry case
  • INSTRUCTIONS FOR INITIAL SET UP
    WHEEL BOLT FITMENT
    Tools Required:
    19mm Socket
    Torque Wrench
    1 - Remove one Caravan Wheel bolt and replace with supplied Security Wheel Bolt receiver.
    2 - Using The Torque Wrench, tighten the Security Wheel Bolt to caravan's manufacturers torque specification.
    Wheel Lock Adjustment
    The Wraith Wheel Lock requires a one off adjustment for optimum fitment for individual wheel sizes. This is achieved by following these simple steps.
    1 - Using the supplied Allen Key, turn grub screw one turn anti clockwise, this a allows the lock shaft to rotate for adjustment.
    2 - Turn the lock shaft anti clockwise to its maximum length.
    3 - Insert key and turn clockwise to unlock.
    4 - Locate lock shaft onto security wheel bolt receiver, a flush fit of the lock body to the wheel surface is required. If adjustment is needed, remove lock from the wheel bolt receiver and rotate the lock shaft clockwise to shorten until a minimal gap between lock body and wheel surface is achieved.
    5 - Turn grub screw clockwise to lock shaft. Set up is now complete.
  •  

Be the first to review this product!

Price: £130.95 £114.95


Product Code: 1199
Quantity:

Add to Basket
Customers who bought this also bought…
Overwintering
Overwintering
£8.95


Web Design Glasgow